Vízügyi Közlemények, 1980 (62. évfolyam)
4. füzet - Ondruss Lajos-Zsámboki Lajos: Mederszűkítés duzzasztásának számítása trapézszelvényű medrekben
Mederszűkítés duzzasztásának számítása 501 — сужение встречается в пределах 0,1—0,6- , — в незастроенном русле принимается равномерное установившееся движение. После выполнения сравнительных исследований и оценок (рис. 2) к расчету подпора предлогается: 1. при а«;0,06 и (о-=0,1 подпором можно пренебречь, 1 2. Если 0,06^а^0,36 и 0,1<со«= 0,18 то для расчета наиболее пригодным ока2,5 - 5а зывается формула Ребока№ J (9). Графическое решение представлено на рис. 3. При известных а, V и m отметка подпора z снимается непосредственн9. 3. если 0,36sа0,6 и о» 0,18 тогда наиболее пригодным оказывается формула 2,5 + 5а Брадлея (18). Графическое решение приводится на рис. 4. * * * Calculation of backwater clue to contraction in trapezoidal channels By L. Ondruss and L. Zsdmboki For solving the problem the authors have reviewed the main types of backwater formulae (Section 2) and analysed critically the current standard specifications VMS 113-72 and MNOSZ 15.202-52 on surface profile calculations. Investigations have been performed for trapezoidal, prismatic channels ( Fig. 1 ) under the following hydraulic conditions: — The trapezoidal channel is straight and the distribution of velocities is symmetrical about the channel axis. The contraction is caused by a rectangular pier, or side wall connection (so that the shape coefficient ß is constant). The contraction ratio is fixed within the practical limits 0.1 a=s0.6. — Channel flow in the absence of contraction is steady, uniform. The general form of the backwater function is given by Fq. (1). Having performed the comparative studies (Fig. 2) and evaluated the results, the following conclusions have been arrived at: 1. If a<0.06 and cu<0.1, no backwater effect need be taken into consideration. 2. The Rehbock formula —Eq. (9)- will produce the most acceptable results it 0.06 =s a =s0.3(i and 0.1 < a>< 0.18. The solution is presented as a gra2. о -I- 5a phical ploL in Fig. 3, whence for known values of a, v and in, the backwater г is found directly. 3. The Bradley formula—Eq. (18) —will yield Ihe most acceptable results, if 0,36 :£ a s 0.(i and o>> —-— 0.18. The graphical solution is presented Fig. 4. 2.5+ 5a * * * 5 Vízügyi Közlemények