Cseh Valentin szerk.: „70 éve alakult a MAORT” – tanulmányok egy bányavállalat történetéből (2009)
László Paczuk: EUROGASCO and MAORT's Production Methods
Sectionalising stations with appropriate capacity tank farms and pressure boosting pumps were provisioned at several points in order to combat pressure loss that is experienced during crude oil transportation. The key figures of facilities associated with the pipeline can be found in Table no. 8. 56 Tank farm (m') Motor Pu mp Plant Tank farm (m') Output (kW) Make Output (l/min) Make No. of units Lovászi 3x800 400 Ganz 1850 SULZER 1 Lovászi 1500 120 Ganz 800 MAZALÁN 1 Bázakerettye 4x800 160 Ganz 900/1000 MAZALÁN 3 Bázakerettye 1500 160 Ganz 900/1000 MAZALÁN 3 Újudvar 2x800 540 Sulzer .5000 SULZER 1 Újudvar 2x200 400 Sulzer 1850 SULZER 1 Balatonboglár 2x800 540 Sulzer 3000 SULZER 2 540 Sulzer 3000 SULZER 1 Mezőszentgyörgy 3x800 120 Ganz 636 MAZALÁN 1 Mezőszentgyörgy 3x800 550 Ganz-Elektro .3000 SL'LZHR 1 120 Ganz-Llektro 636 MAZALÁN 1 Kápolnásnyék 3x800 400 ( íanz 1850 SULZER 1 Kápolnásnyék 3x800 100 C ranz 900/1600 MAZALÁN 1 Budafok 2x800 Total 18.600 3.990 Table no. 8. The construction of the pipeline's starting section can be seen on figure no. 11. The development of working methods In the case of the Southern Zala field, the use of gas injection working was decided initially for the sake of achieving a suitable crude oil yield. Reinjecting a part of produced natural gas into the formation partially replenished reservoir energy as it depleted. 5 gas reinjection wells were set up in the Budafa field, oriented east to west along the ridge. Through these, reinjected gas was delivered to the Budafa, Zala, Bázakerettye, Alsó-Lispe, Felső-Lispe formations. In Lovászi, 4 gas injection wells were provisioned, sited along the backbone yet again, and gas was reinjected in the Lovászi and Alsó-Rátka formations. ^ The effects of gas injection are depicted by the extent of the yellow area on figure no. 12. At the same time, this provides a comparison about the proportions of base production, production ensured by means of gas injection, working through water injection, and subsequently C02. 59 MOIM Arch. AO. 2d 4 t. MOIM Arch. NLAORT 7.d. MOIM Arch. MAORT3.d BÍRÓ CZICZLAVICZ 2001
