Marisia - Maros Megyei Múzeum Évkönyve 34-35. (2014-2015)

Articles

Medieval Weapons from Bistra Muresului

127

rosette rivet heads. The distance between the rivet head and the plate is of 2.0 mm. Pth: 2.0 mm (Fig. 6/7)

8. Trapeze shaped plate, very slightly curved. Dimensions: Is: 8.5 and 8.3, ss: 5.5 and 6.0. It has three rosette rivet heads. The distance between the rivet head and the plate is of 1.5 mm. Pth: 1.8 mm (Fig. 6/8)

9. Trapeze shaped plate, slightly curved. Dimensions: Is: 8.3 and 8.0, ss: 5.0 and 4.5. It has three rosette rivet heads, the distance between them is bigger on the longer side. The distance between the rivet head and the plate is of 1.5 mm. Pth: 1.5 mm (Fig. 6/9)

10. Rectangular plate, very slightly curved. Dimensions: Is: 8.4 and 8.3, ss: 6.7 and 6.5. Its four rosette rivets are at almost identical distance from each other (2.0-2.5 cm). The distance between the rivet head and the plate is of 1.8-2.0 mm. Pth: 1.2 mm (Fig. 6/10)

11. Rectangular plate, slightly curved. Dimensions: Is: 8,4 and 8,3, ss: 6,8 and 6,5. Its four rosette rivet heads are at almost identical distance from each other (2.0-2.2 cm). The distance between the rivet head and the plate is of 1.8-2.5 mm. Pth: 1,1 mm (Fig. 6/11, 7/3)

12. Rectangular plate, very slightly curved. Dimensions: Is: 8.5 and 8.3, ss: 6.5 and 6.5. Its four

rosette rivets were set in two rows. The distance between the rivet head and the plate is of 1.5-2.0 mm. Lv: 1.1 mm (Fig. 6/12)

13. Rectangular plate, slightly curved. Dimensions: Is: 8.5 and 8.3, ss: 6.4 and 6.1. Its four rosette rivets were set in two rows. The distance between the rivet head and the plate is of 1.5-2.0 mm. Pth: 1.1 mm (Fig. 6/13)

14. Rectangular plate, slightly curved. Dimensions: Is: 8.4 and 8.4, ss: 6.4 and 6.3. Its four rosette rivets were set in two rows. The distance between the rivet head and the plate is of 1.8-2.0-2.5 mm. Pth: 1.5 mm (Fig. 6/14)

15. Rectangular plate, very slightly curved, one of the sides fragmentary. Dimensions: Is: 8.4 and 8.4, ss: 6,0 and 6,0. Its four rosette rivets were set in two rows. The distance between the rivet head and the plate is of

1.5- 2.0-2.5 mm. Pth: 1.1 mm (Fig. 6/15)

16. Polygonal plate, slightly curved, one of its longer sides bent. Dimensions: Is: 8.5 and 8.4, ss: 5.6 and 6.1. Its four rosette rivets were set in two rows. The distance between the rivet head and the plate is of

1.5- 2.0 mm. Pth: 1.1 mm (Fig. 6/16)

17. Rectangular plate, very slightly curved.

Fig. 6. Armour plates from Bistra Muresului (Drawn by M. Ferenczi)