Madaras László – Szabó László – Tálas László szerk.: Tisicum - A Jász-Nagykun-Szolnok Megyei Múzeumok Évkönyve 8. (1993)

Kertész Róbert: Adatok a Nagyalföld mezolitikumához

,/nuseau"-type scraper (T.1.11.) Made on a bulky, high flake, the working edge is arched and high, 19,45 - 21,45 mm, inv. N°: 90.5.45. scraper with an arched and poínted working edge (grattoir óval) (T.I.9.) The flake is struck off from the side, the working edge is finely retouched, 25,8 -23,15 mm, inv. N°: 90.5.49. scraper with straight working edge (T./24.) Made on a flake of high back, 15.4 - 11,9 mm, inv. N°: 90.5.53. scraper with straight working edge (T.I.19/A-B) Made on a flake of high back, the side of which is retouched by comfort retouch, 25,7 - 14,1 mm, inv. N°: 90.5.61. combined tooi; scraper with straight working edge and latéra/ burin (T.IV.3/A-B) The working edge ciosed at the distal end of the tooi in an arch, 17,9 - 13,85 mm, inv. N°: 90.5.41. flake scrapers (T.I.12-14/A-B) Carefuf/y manufactured typical too/s with arched working edges, 13,3 - 18,1; 23 - 19,6; 25 - 19,8 mm, inv. N°: 90.5.46., 90.5.52., 90.5.43. irregular flake scrapers (T.122-23.) The working edges of both flakes are on the proximal parts of the too/s on the striking p/atforms, 20,1 - 15,8; 13,6 12,6 mm, inv. N°: 90.5.81., 90.5.33. atypical flake scraper (T.I21.) Made on a high, bulky flake, the working edge is s/ight/y arched, 21,4-20,7 mm, inv. N°: 90.5.47. high scrapers (T./.16/A-B-17/A-B) The too/s have plane-like bases, their working edges are semicircular, 24 - 19,8; 28,8 - 19,6 mm, inv. N°: 90.5.62., 90.5.68. fragment of the working edge of a high scraper (T./.18/A-B) 12,6 - 22,7 mm, inv. N°: 90.5.60. high core scraper with plane-like base (T./20/A-B) 22,4 - 12,45 mm, inv. N°: 90.5.64. flake manufactured with scraper retouch (T.11.30.) 242 - 13,4 mm, inv. N°: 90.5.37. retouched flake with high back (T.II.34.) The tooi is similar to an atypic scraper, 19.5 - 18,9 mm, inv. N°: 90.5.48. Side-scraper — blade-like flake (T.III.6.) A s/ight/y arched working edge is made on the left edge of the tooi with high back, 52,4 24,5 mm, inv. N°: 90.5.108. Borér — atypical tooi made on a flake (T.IV.10/A-B) The distal end of the borér is manufactured in the longitudinal axis of the tooi. The right side of the distal end is manufactured from the ventral face, 27,8 - 21,1 mm, inv. N°: 90.5.180. Burins There are only few typical forms among them, the majority of them - liké the scrapers - were made on flakes. — burin diédre (T.IV.1/A-B) The flake itself is obliquely cut off the manufacture of the chisel edge is R-R made by alternate retouch, 19,1 - 15,15 mm, inv. N°: 90.5.58. — lateral burin (T.IV2.) The working edge of the left side burin made on a blade was manufactured by a sing/e ob/ique b/ow, 20 - 12,6 mm, inv. N°: 90.5200. — lateral burin (T.IV.7.) Right side burin on flake, manufactured from its ventral face. The manufacture of the chisel edge is NR-NR, the left edge of the tooi was worked from the ventral face on the proximal and partly on the médiai part to form a shouldered shape, 33,9 18,8 mm, inv. N°: 90.5.56. — left side burin (T.IV.5.) The tooi was made on a flake. The manufacture of the chisel part is NR-NR, 12,6 - 11,65 mm, inv. N°: 90.5.116. — lateral burin (T.IV.6.) The left side chisel part's manufacture is NR-NR on the flake, the margin of which is here and there worked, 19,9 - 13,85 mm, inv. N°: 90.5.96. — prismatic flake retouched abruptly on its margins (T.IV.8.) A burin edge was made at the base of the tooi by a b/ow. 302 - 20,4 mm, inv. N°: 90.5.111. — obliquely struck off blade (T.IV.4.) An atypic burin edge was made on the left edge of the blade, the manufacture of the chisel edge is NR-NR, 13,8 - 825 mm, inv. N°: 90.5.402. 87