Heves megyei aprónyomtatványok 20/B
PNEUMATIC CYLINDERS 7 166—55 cylinders with magnetic piston for touch-free sensing Cylinder diameter: 25 to 200 mm. Strokes: standard and optional. Working temperature range: —30 °C to + 70 °C. Build-in dimensions comply with those of basic 166 type. (At diameter 25 the build-in length of the cylinder is longer by 10 mm than that of a standard one, because of the permanent magnet built in the piston.) Variants with through piston rod and low pressure hydraulic version can also be ordered. Sensing units Mounting brackets Type Ordering No. Max. load current Sensing unit 24 V = Sensing unit 48 V = Sensing unit 24—220 V ~ Sensing unit 24 V ~ Electric plug (PG 9) 322-12-0310 322-12-0410 322-12-0020 322-12-1000 440-112-000 1.0 A 0,5 A 1.0 A 0,032 A Type Ordering No. Mounting bracket for cyl. dia. 25 mm 322-12-8000 Mounting bracket for cyl. dia. 125—200 mm 322-12-9000 *Please note! The electric plug should be ordered separately. **Please note! For cylinders dia 32—100 mm no separate mounting bracket is required. I 166—65 pressure intensifier Max. input pressure: 1 MPa (10 bar) Max. output pressure: 25 MPa (250 bar) Transmission ratio: 10:1 or 25:1 Cylinder diameters: 80, 160 mm Fluid: input: compressed air output: hydraulic oil Built-in dimensions according to the relevant catalogue sheet. Dimension of 166—65 pressure intensifier Cylinder dia. mm Piston rod dia. mm Connecting ports forpneumatics Transmission ratio Connecting ports for hydraulics Stroke mm Total volume of high pressure fluid cm3 Seal kit 80 16 3/8” 25:1 1” (1 1/2") 125 250 20 45 04903 769 09 25 10:1 125 250° 49 110 04903 770 18 160 32 3/4” 25:1 3/4” 160 320 103 231 04903 771 07 50 10:1 160 320 252 566 04903 772 04 °Order example: 166—56/80/25/250 Available mounting brackets: 366—2008, 366—2208 for cyl. dia. 80 366-2016, 366-2216 for cyl. dia. 160
